Contact US

If you have any questions or suggestions, you can always email them to us.




Enhance MC

Microbial Chelator

Propagation, Field Pre-Plant, Grow & Bloom Enhancer

MSRP will be less than $0.032 a mL per gallon - 0.6-1 mL per application Veg through Flower.

8 acres to the gallon for field applications

Cloning Solution- 3-4 mL per gallon of water or less if using with an IBA type cloning product

GLB does not use yeasts or any Plant Growth Regulators (PGRs) banned or unbanned

Bloom Enhancer-Solubilizes phosphorus to help with better quality and yield

Organic and Safe for use in hydroponic and micro drip emitter systems

Organic Enhance MC- Microbial Chelator

Enhance MC is 30 plus years in the making, and the genesis of this product is based on decades of experience on field crops but it has only matured into its current form over the last 6 months of 2017. All of our products are based in Nutrient Efficiency.

Before you can create optimal nutrient efficiency, which can create optimal quality and yield, you must have the proper biology. Each block is setting the foundation for the next.

In soil or hydroponics a proper foundation can create higher nutrient efficiency uptake which is needed by all plant life. It only makes sense that Enhance MC is our first product in an eventual complete growth system. It’s the easiest to incorporate as it’s the one product that can be added to your current fertilizer program without replacing what you know.

So, what does Enhance MC do?

The initial versions were made for agriculture field crops where the environment is not as easy to control like a greenhouse.  We rarely find perfect growing conditions in much of the country.  Depending on the area, soil structure can be compacted and are more often high in salts. Too often nutrients are tied up in the soil and are unable to be taken into the plant to its maximum capacity. Enhance MC originally was created to help chelate many of the necessary nutrients and use the proper biology so the crops have the best chance to uptake to their full potential.

In addition, the original formulations were made to go through micro emitters in drip systems for field use without clogging up the lines, so it works just as well in hydroponics systems. Enhance MC is a very concentrated, clean microbial product and is worth having as a staple in every greenhouse, field, garden or lawn.

Enhance MC has several specific functions we can talk about, like making nitrogen and phosphorous more readily available to the plant but the rest must be proven through verifiable trials. The list below includes aspects from our biology that we have seen but need additional testing. Enhance MC has a number primary functions which include microbes that work as well or better in a greenhouse setting than in the field.

Current Research Functions for Organic Enhance MC

Helps to defend roots against disease through biology.

Mitigates salt in the soil.

Solubilizes phosphate making phosphate available for uptake by the plant.

Holds nitrogen into the soil.

Aids in nutrient uptake in the upper portion of the rhizosphere.

Unlocks nutrients bound up in the soil for plant uptake.

Breaks down cellulose from plant residue.

Field Crop Management

8 acres to the gallon - As our microbial chelator brings the proper biology into the field it helps to not only support the root system, it allows many nutrients already in the ground or being applied to be optimized, creating a healthier overall crop. In cases where the fields have been over fertilized Enhance MC is nutrient efficient and can help to unlock some of those nutrients to be taken up by your plants. This nutrient efficiency may reduce some fertilization cost inputs and help to reduce nutrient run off into our watersheds and river systems. The same holds true for turf as well.

Ornamental Horticulture (Floral and Landscaping)

Floral and landscaping have the same needs as your turf or produce. Healthy plants and plant cuttings can benefit from proper biology throughout their life cycles where less nutrition in many instances is available to the plant.

Home Garden Use

Plants can only take up as much as it needs and that is if those nutrients are even available for uptake. As flowers and produce need phosphorus to bloom, Enhance MC allows phosphorous to be solubilized into an available nutrient. And if your garden is small enough you could probably share and help everyone’s lawn & garden on the whole block!

Commercial Operations and Higher Yield Output

The initial purpose was to create a microbial product that can be cost effective for mass production operations and with a high yield output. Not every plant will need the exact application rate plan given and that is where through our research trials we will create programs for everything grown in a greenhouse.

Things you should know before use:

The pH level is 2.57 so please wear protective glasses and gloves. Keep out of reach of children.

Living microbes - Keep out of direct sunlight or heat.

For Best Results Use Within 6 Months of Purchase.

If using to compare to competitors, please do not use over 1 mL per gallon of water unless you have a super soil as it is very concentrated. Enhance MC is still very effective at 0.6 mL per gallon of water as well.

Chlorine and Chloramine in the water source may reduce effectiveness of any microbial product. Chloramine can still last in water for over 24 hours. You might not realize that your city water has chlorine or chloramine. It may be reducing the microbial effectiveness in your garden soil and you never knew why your garden doesn’t produce as well as it should .

https://www.cdc.gov/healthywater/drinking/public/chloramine-disinfection.html

All species and strains of plants are different and though low-end application rates work effectively it is up to the grower to find the optimal usage rate. As we get results from our trials we will be updating options for application rates.

Directions for Use

SHAKE WELL BEFORE EACH USE

Use a dry pipette for under 5 mL of Enhance MC or use other measuring instruments that you keep with the bottle to pour into larger measuring cup.

Mix with water and follow application rates.

Application Rates - See Below 0.6-4 mL per application depending on desired result.

The pH level is 2.57- we recommend adding Enhance MC prior to adding any pH Down to lower the pH levels. Using up to 4 mL per gallon may bring the pH down to under 5.5 depending on water source and nutrients, and though it will not negatively affect outdoor or indoor growing, pH level is a matter of grower’s preference. If desired, and the application rate calls for 4 mL you may use less if you lower the pH to 5.5 prior to using 4 mL of Enhance MC and do not want to reduce further. General recommended pH level is 5.5-6.2 during grow and bloom phases may be less during cloning.

Do not cross contaminate bottle it may activate microbes.

Replace cap to bottle as soon as finished as microbes are placed in dormancy when packaged. Oxygen, water and heat can begin to activate microbes.

SHAKE WELL BEFORE EACH USE

The pH level is 2.57- we recommend adding Enhance MC prior to adding any pH Down to lower the pH levels. Using up to 4 mL per gallon may bring the pH down to under 5.5 depending on water source and nutrients, and though it will not negatively affect outdoor or indoor growing, pH level is a matter of grower’s preference. If desired, and the application rate calls for 4 mL you may use less if you lower the pH to 5.5 prior to using 4 mL of Enhance MC and do not want to reduce further. General recommended pH level is 5.5-6.2 during grow and bloom phases may be less during cloning.

Use a dry pipette for under 5 mL of Enhance MC or use other measuring instruments that you keep with the bottle to pour into larger measuring cup.

Do not cross contaminate bottle it may activate microbes.

Mix with water and follow application rates.

Replace cap to bottle as soon as finished as microbes are placed in dormancy when packaged. Oxygen, water and heat can begin to activate microbes.

Application Rates - See Below 0.6-4 mL per application depending on desired result.

Propagation Application Rates

There are several different ways to propagate cuttings, in our research trials we will be investigating as many different as possible...

Read More

Propagation Application Rates

Close

There are several different ways to propagate cuttings, in our research trials we will be investigating as many different techniques as possible, but the suggestions below are just one way.

When only using as Cloning Solution additive

 

3 mls per gallon of water as a pre soak of your soil or cubes.

 

Cloning Solution

  1. Add 3-4 mL per gallon of water in any or all operations including for pre-soaking of soil or cubes, and all watering through rooting process. Enhance MC may be added to misting spray bottles as well but it works at a higher quality if it gets to the base of the clone.
  2. Enhance MC by itself will help to root clones but when getting past 14 days your clones will start to need additional nutrients. We recommend testing as what point you might need additional nutrients and how much,   GLB Organic Veg  has also been used effectively in conjunction with Enhance MC for Cloning.  In this case use 3 mL of Enhance MC and 1 mL of GLB Liquid Organic Matter per gallon of water.***   Some wait until day 10 or later to add the GLB Organic Veg to not give too much additional nutrients to early to help stretch root system.

Seed Propagation

  1. 0.25 mL per gallon of water for the first 8-10 days of growth once placed in soil or pre-soak soil tray or cube/pellet/puck. Use 0.25-0.50 mL per gallon after from day 8-20 during watering until seedling has fully rooted. pH water to 5.5-6.2
  2. After day 8 If necessary depending on soil mix if using in conjunction with GLB Organic Veg only use max 0.25 mL of Enhance MC with 0.25 mL of Liquid Organic Matter per gallon. We do have growers that have tested using igher amounts of GLB Organic Veg after 7-10 days test at your own risk.  The plants will want to feed at a higher rate if using Enhance MC on seedlings.
  3. You may also want to just use just as a presoak of the soil or cubes and not used during watering and compare. Each strain of seed can react differently.

Root Dip & Cloning Solution Propagation

**Note** pH may go below 5.5 with 4 mL of Enhance MC in a gallon of water or less.  It will not burn or negatively affect the clone.  It is a grower’s preference if they do not want there water to go below 5.5 pH. Always test process versus your current program to see what rooting gel and cloning solution works best together. 

  Soil or Rooting Cubes

      Home Garden Small Operation –

  1. Put 3-4 mL of Enhance MC per gallon of water fill with 1-8 oz of water at least 1-2 inches deep.
  2. Take cutting, make 45 degree angle cut and trim clone, place in solution above for 2-5 minutes.
  3. Place clone in soil or rooting cube
  4. Once done with all clones take remaining 4 mL in 1-8 oz of water Enhance MC solution and soak soil tray or propagation rooting cubes with solution.

     

     Large Operation – 

  1. Carrier Solution- make a container with 3-4 mL of Enhance MC per gallon of water that will be used to take clone cuttings from mother plants to cloning area.
  2. Take cutting, make 45 degree angle cut and trim clone, place in solution above for 2-5 minutes.
  3. Cost and Time Saving Process – at time of initial cutting from mother plant do not trim or clean up but make the final 45 degree angle cut prior to putting in the container used to transport to cloning station.  At cloning station, cloning personnel would only need to trim and place in soil or rooting cube removing the step of dipping in concentrated rooting  solution. There are farmers cloning up to 50,000 clones a week and the elimination of even a 1 second process removes over 14 hours of work. Let clones stand in carrier solution 2-5 min at least before trimming and putting in cube.

 

Aeroponic or Hydroponic Cloning 

  1. Take cutting, make 45 degree angle cut, trim clone, and put in neoprene puck and put in cloner.
  2. Add 3-4 mL per gallon of water used in reservoir.

 

 

Field Crops Application Rates

In relation to field crops, there may be a number of issues that might need to be address...

Read More

Field Crops Application Rates

Close

Field Crops

In relation to field crops, there may be a number of issues that might need to be address but from the Enhance MC standpoint biology is what transforms unavailable nutrients into allowing your plants to have as much as they need while helping to keep your crops healthier.  Obviously as you will see through the application rates that more is better but for the field you should put on at least 16 ounces of Enhance MC per acre before planting.  There also may be times that you want to reapply depending on your irrigation.  In 2019 we will be opening up large operation farming consulting so please email at Info@GreenLifeBiotics.com for more information.

In season applications- Due to the chelation aspects we recommend feeding 16 oz per acre as many as 4 through the season if by a drip system.

  • 1 acre – 16 ounces of Enhanced MC injected into watering system or riding sprayer. We recommend 16 oz of GLB Liquid Organic Matter as a microbial food source for the microbes to accelerate  the replication process.
  • Additional application can be applied during the season at the same or reduced amounts.  Please contact for more information as each situation needs customized application rates.

Ornamental Horticulture (Floral and Landscaping) Application Rates

Read More

Ornamental Horticulture (Floral and Landscaping) Application Rates

Close

Pre-Plant

0.6-1 mL per gallon for areas that can be sprayed with pump sprayers.

16 oz per acre if for large landscaping

After Planting

0.6 mL per gallon of water 1-4 applications per month

 

Home Garden Use – Hobbyist Limited Feeding Application Rates

May also follow weekly detailed feeding schedule below or a combination of the home garden and commercial...

Read More

Home Garden Use – Hobbyist Limited Feeding Application Rates

Close

  1. Detailed commercial operation application rates below for potentially higher quality and better yield.
  2. If transplanting an already rooted plant into soil, inoculate at planting with 4 mL per gallon of water or 3 mL of Enhance MC and 1 mL of GLB Liquid Organic Matter
  3. During season apply to base of plant
    1. Flowers and landscape –  0.6-1 mL per gallon of water 0-3 times a month or as needed.
    2. Fruits and vegetables – 0.6-1 mL per gallon of water 0-4 times a month or as needed.
    3. The last month – 0.6-1 mL per gallon of water 0-4 times a month or as needed but recommend at least 1-4 times

**Note **  For areas around the country that receive enough rain during the growing season and may not need to water if any or on a limited basis  you may add 1 mL to a smaller amount of water and apply to the base of the plants and root zone area.  1-2 mL applied per 3 feet x 3 feet area 

Commercial Operations and Higher Yield Output Application Rates

These application rates are based on flowering or fruiting during a 90-120 day cycle. Please understand the species of...

Read More

Commercial Operations and Higher Yield Output Application Rates

Close

These application rates are based on flowering or fruiting during a 90-120 day cycle. Please understand the species of plant you are growing and adjust application rates and time frames to the specific species being grown.

For all Hydroponic, Soil and Soilless Mediums

  1. If transplanting an already rooted plant into soil without prior application of Enhance MC, inoculate at planting with 1-2 mL per gallon of water or use GLB 0-0-1 Transport/Transplant for less transplant shock.
  2. 0.6-1 mL per gallon of water during Vegetative Growth phase once transplanted.
  3. 0.6-1 mL per gallon of water from start of Bloom phase
  4. 4-8 mL per gallon of water during Flush if in pots. Due to additional nutrient uptake by the plant it may take two weeks instead of one on a final flush to see nutrients uptake from the leaves.

 

Super Soil

****Note****

  1. 0.6-1 mL through the entire process will give great results and we will side by side versus any other microbial product for bloom enhancement at these numbers. However, we have found some like to use more at the rates below with additional success but only in super soil do not use these higher application rates in soilless or partial soil mixes as if you have deficiencies in the soil that plant will show those deficiencies.

 

Vegetative Phase

  1. 0.6-2 mL per gallon of water.

 

Bloom Phase

  1. 0.6- 2 mL per gallon of water

 

Flush – if in pots

  1. 4-8 mL per gallon of water